This site uses cookies. Going on you accept it.

superClean ultra


Compatibile

superClean DCS
Flash Point Not flammable
Water miscible Yes
V.O.C. Free
MOSH Free
MOAH Free
Biocide Free
GHS label GHS 05
PH > 12

Protect from frost, heat and direct sunlight
(do not store at temperature less than -5 ° C).
Store at room temperature in the original container.

STORAGE

20 lt, 200 lt, 1000 lt.

PACKAGING

PRECAUTIONS FOR USE

  1. Dangerous product Due to the high pH value > 12
  2. Causes severe skin burns and eye damage
  3. Biocide Free

HEALTH AND SAFETY INFORMATION

APPLICATION

  1. Used in sheetfed, coldset/heatset; rotogravure; flexo and screen printing.
  2. Removes ink deposit, glue and oil/fatty deposit and other contamination from all kind of surfaces
  3. Removes caked and glue residues from gluing machines for folding boxes or from rubber cylinders.
  4. Removes water based and UV coatings
  5. Can be used for press frames, floors and general cleaning
  6. Deep floor cleaning in Rotogravure Industry

PROPERTY

Due to the high pH value usual safety precautions when working with highly concentrated additives should be observed.
Always use safety glasses and gloves.
If the product comes in contact with the skin rinse immediately with water.
If the product comes in contact with eyes immediately flush with water and consult
a doctor.

superClean ultra

Technical Data Sheet

CHEMICAL CHARACTERISTICS

Pressroom Cleaner Concentrate.



Compatibile

superClean DCS
Flash Point Not flammable
Water miscible Yes
V.O.C. Free
MOSH Free
MOAH Free
Biocide Free
GHS label GHS 05
PH > 12

Pressroom Cleaner Concentrate.

PROPERTY

  1. Used in sheetfed, coldset/heatset; rotogravure; flexo and screen printing.
  2. Removes ink deposit, glue and oil/fatty deposit and other contamination from all kind of surfaces
  3. Removes caked and glue residues from gluing machines for folding boxes or from rubber cylinders.
  4. Removes water based and UV coatings
  5. Can be used for press frames, floors and general cleaning
  6. Deep floor cleaning in Rotogravure Industry

APPLICATION

Use the product pure or diluted in water in a ratio of 1 + 3, 1 + 6, 1 + 9 depending on the degree of dirt and the material to be cleaned.
Where necessary rinse with water.

Use the product pure or diluted in water in a ratio of 1 + 3, 1 + 6, 1 + 9 depending on the degree of dirt and the material to be cleaned.
Where necessary rinse with water.

HEALTH AND SAFETY INFORMATION

  1. Dangerous product Due to the high pH value > 12
  2. Causes severe skin burns and eye damage
  3. Biocide Free

PACKAGING

20 lt, 200 lt, 1000 lt.

STORAGE

Protect from frost, heat and direct sunlight
(do not store at temperature less than -5 ° C).
Store at room temperature in the original container.

CHEMICAL CHARACTERISTICS

PRECAUTIONS FOR USE

Due to the high pH value usual safety precautions when working with highly concentrated additives should be observed.
Always use safety glasses and gloves.
If the product comes in contact with the skin rinse immediately with water.
If the product comes in contact with eyes immediately flush with water and consult
a doctor.

Slider